-
- Burley Brampton on grey/green slate. To be plastered by customer.
-
- First fire in a Burley Brampton
-
- Chinese stove in fireplace prepared by customer
-
- Morso Squirel
-
- Sandstone cut and ready to lay on a bed of mortar
-
- Hearth laid and Mendip Loxton 5 installed.
-
- Burley Holleywell
-
- Saltfire ST2, fireplace prepared by customer.
-
- 🙁
-
- Vented closure plate fitted in bedroom.
-
- It’s got to come off!
-
- Shaun and the little breaker
-
- Bagging up the rubble.
-
- Recess cleared and bricks cleaned
-
- End of first day.
-
- Plastered and dark grey slate fitted.
-
- Contura i5L installed.
-
- A nicely fitted fireplace, it’s coming off.
-
- Wooden surround removed
-
- Shaun and the big breaker.
-
- Me and the little breaker. This fireplace was very hard to breakout, I damaged my elbow from all the vibration.
-
- Re-pointing the bricks. some of the bricks needed to be replaced.
-
- Boarding the sides as the bricks at the side were beyond saving.
-
- Making preparations for the closure plate.
-
- Waiting for the hearth.
-
- Mendip Churchill 5 on dark grey slate.
-
- Ceiling cut out, joists strapped and cut.
-
- Joist straps, upper vented firestop plate and supports.
-
- Down through the roof.
-
- It was quite unpleasant working in such a tight, precarious space.
-
- Black vented firestop plate.
-
- A heat shield I made out of steel on site so the customer could keep the wooden rail. Without a heat shield it would be too close to the stove and pipe and could combust.
-
- Black Dinak system.
-
- Victoria Nero Lux on slate.
